Dry-Type Copper Rice Machine — High-Purity Cable & Wire Recycling Solution
The Dry-Type Copper Rice Machine is designed for recyclers processing mixed copper wire and cable scrap into separated copper granules and insulation or plastic fractions. Its dry processing route avoids a wet separation stage and can help recycling plants simplify their copper recovery process.
Solution Fit: Why Recyclers Choose This System
Cable and wire scrap can contain different diameters, insulation types, and copper contents. This system is designed to process various thick, thin, and mixed wire and cable scrap, helping recyclers reduce manual sorting before granulation.
- Specified copper separation rate of approximately 98%–99.8% under suitable operating conditions
- Dry processing without a wet separation stage
- Designed to produce separated copper granules and insulation or plastic fractions
- Suitable for cable recyclers, scrap processors, and material recovery operations
Core Components & Engineering
Pure-Copper Motor with Protection System
The drive system uses a pure-copper motor configuration with overload and power protection to support stable operation during industrial processing. Final motor specifications should be confirmed according to the selected machine configuration.
Dual-Frequency Inverter Control
A frequency inverter can be used to regulate operating speed and provide operators with greater control over machine performance. The final control configuration depends on the selected model and electrical requirements.
SKD-11 Wear-Resistant Crushing Blades
The crushing blades are specified as SKD-11 tool steel components, selected for hardness and wear resistance. Blade service life depends on cable composition, feed conditions, operating hours, and maintenance practices.
Technical Specifications
| Parameter | Specification |
|---|---|
| Processing type | Dry-type cable recycling; wet-type configuration may be available by model |
| Separation rate | Approximately 98%–99.8%, depending on material and operating conditions |
| Applicable material | Various thick, thin, and mixed copper wire and cable scrap |
| Drive motor | Pure-copper motor with overload and power protection |
| Control system | Frequency inverter control |
| Crushing blade material | SKD-11 tool steel |
| Output | Copper granules plus separated insulation or plastic fractions |
Application Scenarios
The Dry-Type Copper Rice Machine is suitable for cable scrap recyclers, wire and cable manufacturing waste recovery, scrap processing companies, and metal trading businesses seeking to upgrade mixed cable scrap into separated copper granules and recyclable insulation or plastic fractions.
Frequently Asked Questions
What type of cable scrap can a dry-type copper rice machine process?
The machine is designed for various thick, thin, and mixed copper wire and cable scrap. The actual material range, feed size, and recommended configuration should be confirmed according to the cable type and processing requirements.
Does the copper rice machine use a wet separation process?
The dry-type configuration separates copper from insulation or plastic without a wet separation stage. This makes it suitable for recycling operations that prefer a dry processing route.
What are the outputs of the copper wire recycling machine?
The recycling process is designed to produce separated copper granules and insulation or plastic fractions. Output quality depends on incoming cable material, feed size, machine configuration, and operating conditions.
What copper separation rate can the machine achieve?
The supplied specification indicates a copper separation rate of approximately 98%–99.8%. Actual results can vary according to cable composition, feed material, particle size, and operating conditions. Final performance should be confirmed against the buyer's material.
